pH Meter Accessories
Cole-Parmer pH electrode, sealed/SJ, for Jenco meters
All-in-One" electrodes offer versatility and customization. These electrodes combine the pH reference, pH half-cell, and temperature sensor in one 12mm-diameter electrode body. The seven designs allow you to select between low-maintenance, sealed electrodes or clog-resistant refillable electrodes. Tuff-Tip electrodes feature a semi-domed tip which protects the pH bulb and ensures a quick response in harsh and dirty samples. PBR-style electrodes provide predictable, reliable, and quick responsesno matter what the sample temperature. This design virtually eliminates drift, accuracy problems, and premature performance losses due to temperature. All electrodes include 3-ft cable and connector for pH, except where noted.
Oakton by Cole-Parmer Submersible 3' L pH Probe, DJ/ABS/100Ohm RTD; Plug/BNC
Submersible electrodes operate from 32 to 176>F (0 to 80>C) and can submerse up to the cable. Electrodes are potted in a 3 foot length by 1-1/16 inch diameter ABS sheath. These electrodes are ideal for measurements in open containers, such as tanks or troughs.
Cole-Parmer Solution Grounded pH Probe, DJ/PPS/100Ohm RTD; Tinned/BNC
These electrodes offer solution ground, PTFE references with double junctions and polymerized gel. All models include a 10-ft cable with BNC pH connector and Ryton housing with 3/4'' NPT(M) threads.
Oakton by Cole-Parmer Submersible 3' L pH Probe, SJ/ABS; BNC
This submersible electrode operates from 32 to 176>F (0 to 80>C). Submerse it up to the cable and measure pH from 0 to 13.
Cole-Parmer Oakton Replacement Sensor for pHTestr 5F
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.
Cole-Parmer Oakton Replacement Sensor for ORPTestr 5
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.
Chemglass Life Sciences pH Probe, with K8, 12 x 225mm
pH Range: 0-12 Electrodes are filled with gel reference electrolyte under a pressure of 2. 5 bar Pressure Range: From vacuum up to a process of maximum 36PSI (2. 5 bar) Temperature Range: Steam sterilization/autoclavable to 266 degreesF (0 to 130 degreesC) In-situ sterilization: Up to 100 cycles under standard conditions Fully autoclavable or in-situ sterializable
Hach Company Hach pHD Online Process pH Sensor - General Purpose pH Sensor
General Purpose Online Process pH Sensor - pHD Technology, Glass pH Electrode, PEEK Housing, Convertible Mount, 4.5m Cable
Broadley James Corporation F-235 Sterilizable pH Electrode, pH Range: 0-13 pH, Temperature Range: 0-135 ˚C
The F-235 Sterilizable pH Electrode is a sealed, gel-filled, sterilizable, autoclavable design with built-in temperature element. This allows for the automatic compensation of Nernstian temperature effects in processes with wide pH ranges and significant temperature shifts.The VarioPin connector allows for a multiple connection; both pH signal and temperature signal in the same wiring harness. The temperature element is either a PT100 or PT1000 Platinum Resistance Device, which are compatible with the majority of commercially available instruments. The unique construction methods used by Broadley-James allows this sterilizable pH electrode to operate at pressures of up to 10bar (150psig) and temperatures up to 135°C.F-235 Sterilizable pH Electrode SpecificationspH Range: 0-13 pHTemperature Range: 0-135 ˚CTemperature Range: 32-275 ˚FPressure Range: 0-150 psigPressure Range: 0-10 barTemperature Sensor Range: 0-100 ˚C
METTLER TOLEDO INPRO 3253/225/PT100 PH ELECTR
InPro 3253 pH electrode for biotechnological and pharmaceutical processes. Temperature compensation Pt100, shaft length 225.
Chemglass Life Sciences pH Probe, with VP, 12 x 325mm
pH probe with VP, 12x325mm. • pH Range: 0-12 • Electrodes are filled with gel reference electrolyte under a pressure of 2.5 bar • Pressure Range: From vacuum up to a process of maximum 36PSI (2.5 bar) • Temperature Range: Steam sterilization/autoclavable to 266°F (0 to 130°C) • In-situ sterilization: Up to 100 cycles under standard conditions • Fully autoclavable or in-situ sterializable